Order types: market, limit and stop orders
Published · by Hunt4Coin
An order type is the instruction you give an exchange about how to trade: a market order buys or sells now at whatever prices are available, a limit order trades only at your price or better, and a stop order waits until a trigger price is reached and then sends a market or limit order.
Lesson 5 of the Hunt4Coin Trading Mastery Program · Module 1: Foundations · Previous: Lesson 4, liquidity and spreads · Next: Lesson 6, exchange fees and what they do to a trade.
Lesson 4 showed that the price on the chart is the last trade, and that the price you get depends on the order book. This lesson is about the other half of that equation: the instruction you send. The same idea, sent as a market order, a limit order or a stop order, can end in a different price, a partial fill, or no trade at all. Days like 13 November 2026, when Bitcoin fell through $70,000 with more than a billion dollars of liquidations, show the difference clearly.
What it is: the four orders every trader needs
| Order | What you say to the exchange | You are certain of | You are not certain of |
|---|---|---|---|
| Market | "Buy (or sell) this amount now." | That it fills (if there is any liquidity) | The price: it walks the book |
| Limit | "Buy at this price or lower" (or "sell at this price or higher"). | The worst price you pay | That it fills at all |
| Stop-market | "If price trades at the trigger, send a market order." | That it fires once triggered | The fill price after the trigger |
| Stop-limit | "If price trades at the trigger, send a limit order at this price." | The worst price | That it fills once triggered |
Two more ideas complete the picture:
- Maker and taker. A limit order that rests in the book adds liquidity: you are the maker. A market order, or a limit order priced to trade at once, removes it: you are the taker. Most exchanges charge takers more, which is why order type and fees are linked (Lesson 6).
- Where stops live. On most spot exchanges a stop order is held by the exchange and is invisible in the order book until it triggers. It is a plan, not liquidity, until the trigger turns it into a real order.
A useful way to remember it: a market order trades certainty of execution for uncertainty of price; a limit order does the reverse. A stop decides when you send one of them.
How each order meets the order book
Picture the book from Lesson 4: bids (buyers) below the price, asks (sellers) above.
- Market buy: takes the lowest ask, then the next, until your size is filled. On a deep pair the average price is almost the last price; on a thin pair it can be far worse. In our Binance snapshot at 05:02 UTC on 13 November, a $100,000 market buy cost about 0.011% above the mid-price on BTC/USDT and about 0.11% on LINK/USDT, but around 40% on the median USDT pair.
- Limit buy below the price: joins the bids and waits. It fills only if sellers come down to it. If price touches your level for a moment, you may be filled partly or not at all, because orders at the same price fill in time order.
- Stop-market sell (a typical stop-loss): nothing happens until a trade prints at or below the trigger. Then it becomes a market sell and takes the best bids, wherever they are at that moment. In a fast fall the bids can be well below the trigger.
- Stop-limit sell: at the trigger it places a sell limit. If the price has already fallen past your limit, the order sits unfilled above the market while price keeps falling.
How to spot it on a chart: the 13 November 2026 example
You cannot see other traders' stops, but the chart shows where they are likely to be: just beyond obvious levels, such as recent swing lows, round numbers and the edges of a range. When price reaches those places quickly, stops trigger together and turn into market orders, and that is visible as long wicks, large candles and volume spikes.
What the chart showed (Bitcoin, Binance BTC/USDT, daily and 15-minute):
- Bitcoin's daily candle for 12 November opened at $74,015.20 and closed at $71,460.00 (−3.45%), below the lows of the previous six days. Below it sat the round number $70,000, which had not traded since August.
- On 13 November price crossed $70,000 at about 02:52 GMT (TASS, quoting Binance) and by 05:00 UTC had reached $68,307.28 on Binance. About $1.23 billion of crypto positions were liquidated over 24 hours, more than 96% of Bitcoin's liquidations on the long side (CoinGlass via crypto.news). Liquidations are forced market orders, so they behave like a cluster of stop-market sells.
- On the 15-minute chart this appears as a run of wide red candles with rising volume through the round number, followed by a bounce. After the US PPI report later that day price recovered to about $69,800 but did not get back above $70,000 (TradingNEWS).
Now take three hypothetical traders who each held Bitcoin bought earlier and placed orders under the $70,000 level the night before. These are illustrations of how each order type behaves, not records of real orders, and fills on the day depended on the exact book at the exact moment.
- Stop-market sell, trigger $69,900. Triggered as soon as a trade printed at $69,900. It then sold into the bids that were there. In a book that was thinning under liquidations the average fill could be somewhat below $69,900; on a deep pair like BTC/USDT for a small size, likely only slightly. Result: out of the trade, near the plan, with some slippage.
- Stop-limit sell, trigger $69,900, limit $69,800. Triggered at the same moment and placed a sell limit at $69,800. If price moved through $69,800 before the order was filled, it was left resting above the market. Price later traded at $68,307.28 and, on 14 November, below $67,000 (Cointelegraph, via SpendNode). Result: no protection at all unless the trader acted by hand. This is the most common surprise with stop-limits.
- Limit buy at $68,500 from a trader who wanted to buy lower. The 05:00 UTC low of $68,307.28 traded through it, so it had a fair chance to fill. A limit at $68,200, only 0.16% lower, had not been reached by that time. Result: a limit gives you your price or nothing, and "nothing" can be decided by a few dollars.
The lesson from the example is not which choice was right: it is that each order type has a known way of failing, and the trader chooses which failure they can live with.
How traders use order types
- Entries. Patient traders use limit orders at a level they have planned (a retest of support, the edge of a range), accepting that some trades will be missed. Traders who must be in when a level breaks use stop-market buys above resistance, accepting slippage.
- Stop-losses. Most risk managers prefer stop-market orders for stop-losses, because a stop that does not fill is worse than a stop that fills badly. Stop-limits are mainly used with a wide gap between trigger and limit, on liquid pairs, by traders who are watching.
- Take-profits. A limit sell at the target is the usual tool: you are paid the maker fee and you know the price. Remember that a target is a scenario you planned, not a forecast.
- Placement. Because stops cluster just beyond obvious levels, many traders place theirs beyond the level plus a buffer (for example a fraction of the average true range, covered in Module 5) rather than one tick under a round number.
When it fails: common mistakes
- Market orders on thin pairs. The order walks the book; in our snapshot a $10,000 market buy cost 0.29% to 0.68% on the thinnest pairs we checked, before fees.
- Stop-limit with no gap. A limit equal to the trigger fills only if price trades there again. In a fast move it often does not.
- Stops exactly on round numbers or obvious lows. That is where everyone's stops are, and where wicks reach first.
- Forgetting that limit orders can fill partly. Plan what you will do with half a position.
- Moving the stop further away once price approaches it. The order type does not matter if the plan is abandoned.
- Confusing an alert with an order. A price alert tells you; it does not trade for you.
Risk management
- Decide the invalidation first, then the order. Ask where the idea is wrong (below the swing low, back inside the range), then place the stop beyond it.
- Size from the stop, not from hope. Position size = account × risk per trade ÷ distance to the stop. With a $1,000 account, 1% risk and a stop 2% away, the position is $500.
- Budget slippage into the risk. On fast days, assume a stop-market can fill worse than its trigger; on smaller coins, assume more. If an extra 0.5% of slippage would break your 1% risk, the position is too large or the pair too thin.
- Prefer protection that fills. Use stop-market for stop-losses unless you have a specific reason not to.
- Avoid the hour around scheduled news (CPI, PPI, rate decisions) if your plan relies on tight stops: spreads widen and books thin out, as on 13 November.
Practice drill (free, about 20 minutes)
- Open the free Bitcoin page and the candle charts on the 15-minute timeframe; scroll to 13 November 2026 and find the candles that crossed $70,000. Note the widest candle and its volume.
- Mark the most obvious level where you think stops were sitting the night before (a recent low or round number). Was it hit with a wick or a full candle?
- Write down three orders you could have placed: a stop-market, a stop-limit and a limit buy, with prices, and decide from the candles whether each would have filled.
- In paper trading, open a practice buy on a liquid coin and set a stop-loss and a take-profit. Hunt4Coin's paper trades fill at the live price and close themselves when a level is reached, checked on 5-minute candles; if price gaps through a level, the trade closes at the next open, which is how a stop-market behaves in a gap.
- Set a free price alert at a level where you would place a limit order, and note how often it is touched in the next week without being held.
- In the backtester, run a simple rule twice with the stop 1% and 2% away and compare how many trades were stopped out.
FAQ
Which order type is safest for a stop-loss? A stop-market order is the usual choice, because once triggered it fills. The price may be worse than the trigger in a fast market, but a stop-limit can fail to fill at all, which leaves the full position open.
Why did my limit order not fill when the price touched my level? Orders at the same price fill in the order they arrived. If price only touched your level briefly, the orders ahead of yours may have used up all the trading there. A limit one tick better than the level, or a little patience, changes that.
Is a market order always a bad idea? No. On deep pairs and small sizes a market order often costs only a fraction of a basis point more than the mid-price. It becomes expensive on thin pairs, for large sizes, and during fast moves; check the depth first, as in Lesson 4.
Lesson 5 summary
A market order buys certainty of execution and pays for it in price; a limit order buys certainty of price and pays for it in missed fills; a stop decides when one of them is sent. Stops cluster beyond obvious levels and become market orders together, which is what long wicks through round numbers like $70,000 on 13 November 2026 look like. Choose the failure you can accept, size from the stop, and budget for slippage. Next, in Lesson 6, we look at exchange fees: maker and taker, and what they do to a trade. Full course: Hunt4Coin Trading Mastery Program.
Education only, not financial advice. Trading crypto, stocks, metals, oil or forex is risky; never trade money you can't afford to lose.
Sources
- Hunt4Coin: Bitcoin live price and Binance BTC/USDT candles
- TASS: Bitcoin value drops below $70,000 first time since August 20 (13 Nov 2026)
- crypto.news: Bitcoin price crashes below $70K as crypto liquidations hit $1.2B (13 Nov 2026)
- TradingNEWS: Bitcoin holds the 200-week line (13 Nov 2026)
- SpendNode: Strategy's Bitcoin stack falls $6.85B underwater as BTC slides (14 Nov 2026)
- Hunt4Coin docs: paper trading (how take-profit and stop-loss fill)