Hunt4Coin

Liquidity and spreads: choosing which pairs to trade

Published · by Hunt4Coin

Liquidity is how much of a coin you can buy or sell close to the current price without moving that price; you see it in the bid-ask spread (the gap between the best buyer and the best seller) and in order-book depth (how much is waiting near the price), and together they decide how much a trade costs you before any fee or any price move.

Lesson 4 of the Hunt4Coin Trading Mastery Program · Module 1: Foundations · Previous: Lesson 3, trading pairs · Next: Lesson 5, order types: market, limit and stop orders.

In Lesson 3 we saw that every price is a pair. This lesson answers the next question a careful trader asks: can I actually trade this pair at the price on the chart? The chart shows the last traded price. The price you get depends on who is waiting in the order book at the moment you click, and on a day like today that difference matters more than usual.

What liquidity is

An exchange keeps an order book for each pair: a list of buy orders (bids) and sell orders (asks) that traders have placed and that are waiting to be filled.

  • The best bid is the highest price someone is willing to pay right now; the best ask is the lowest price someone is willing to sell at.
  • The spread is the gap between them: ask − bid. As a percentage, (ask − bid) ÷ mid-price × 100, where the mid-price is halfway between the two.
  • Depth is how much money is waiting on each side within a given distance of the mid-price, for example within 1%.
  • Slippage is the difference between the price you expected and the average price you actually got. A market order that is bigger than the best ask "walks the book": it fills the best ask, then the next one, and so on, each at a worse price.

A liquid pair has a tiny spread and deep books, so even large orders fill close to the mid-price. An illiquid pair has a wide spread and thin books: the chart may look normal, but a modest order can move the price against you, and the last traded price on the chart may be far from what is on offer right now.

How to spot it: a real order-book snapshot

At 05:02 UTC on 13 November 2026, a few hours after Bitcoin first traded below $70,000 since August and while about $1.2 billion of crypto positions were being liquidated over 24 hours (today's news), we read the full order books of a few Binance spot pairs through Binance's public API and simulated a market buy of $10,000 and of $100,000 against the asks. "Cost of a market buy" is the average fill price above the mid-price, before any exchange fee.

PairBest bid / best askSpreadAsks within 1% of midCost of a $10,000 market buyCost of a $100,000 market buy24h volume
BTC/USDT68,544.96 / 68,544.970.00001%$12.8 million0.008%0.011%$1.71 billion
ETH/USDT1,924.23 / 1,924.240.0005%$7.4 million0.002%0.018%$671 million
SOL/USDT78.43 / 78.440.013%$1.65 million0.006%0.017%$220 million
XRP/USDT1.0055 / 1.00560.010%$1.10 million0.005%0.030%$116 million
DOGE/USDT0.06340 / 0.063410.016%$0.71 million0.020%0.048%$48.7 million
LINK/USDT9.696 / 9.6970.010%$0.31 million0.030%0.113%$24.0 million
MMT/USDT (median USDT pair)0.1134 / 0.11360.176%$14,7520.29%about 40%$452,000
GSB/USDT (among the least traded)914.48 / 915.050.062%$9,1540.68%1.09%$19,600

Snapshot of Binance spot order books, 13 Nov 2026, about 05:02 UTC; "median USDT pair" means the middle of the 518 trading USDT pairs ranked by 24-hour volume. Order books change every second, so these are a picture of one moment, not fixed costs.

How to read it:

  1. The top pairs are extremely cheap to trade even on a violent day. A $100,000 market buy in BTC/USDT would have paid about 0.011% above mid, about $11. That is about a tenth of a typical 0.1% taker fee.
  2. Cost grows fast as you move down the list. LINK/USDT is a large, well-known coin, yet a $100,000 buy cost about 0.11%, ten times Bitcoin's.
  3. The median pair is a different world. On the pair in the middle of Binance's USDT list, there was only about $14,750 of asks within 1% of the price. A $10,000 buy cost about 0.29%, and a $100,000 buy would have had to climb so far up the book that its average price would be roughly 40% above mid. Nobody sensible would place that order, but a stop-loss market order or a liquidation engine can.
  4. Spread alone can mislead. GSB/USDT's spread (0.06%) looked tighter than MMT's (0.18%), but there was only about $9,000 on the ask side within 1%, so a $10,000 buy cost 0.68%. Always look at depth as well as the spread.

Reading liquidity on a chart

You can't see the order book on a candle chart, but the chart leaves clues:

  • Volume bars. Low and irregular volume usually means thin books. On Hunt4Coin's candle charts add the Volume indicator under the price.
  • Gappy candles and long wicks. On illiquid pairs, candles jump from one price to another with gaps between closes, and single trades leave long wicks that never trade again. On a thin pair you will often see flat candles (no trades) followed by sudden spikes.
  • Same coin, different exchanges. If one exchange's chart is jumpy while another's is smooth, liquidity is elsewhere. Hunt4Coin lets you switch the exchange on the same coin's chart.
  • Liquidity changes with time. Spreads widen at weekends, around news (today's PPI release is at 8:30 a.m. ET) and during liquidation cascades, when resting orders get pulled.

How traders use liquidity

  • Choosing what to trade. Many traders set a minimum 24-hour volume or depth before a coin goes on their watchlist. A practical check: the order you plan to place should be a small fraction of the depth within 1% of the price.
  • Choosing the pair. If a coin trades against USDT, USDC, BTC and a local currency, the deepest pair usually has the smallest spread. Lesson 3 showed that the quote also changes what the chart measures, so check both.
  • Choosing the order type. In thin books, a limit order (next lesson) avoids paying the spread and walking the book; the cost is that it may not fill.
  • Sizing. Position size is limited by your risk per trade and by liquidity: if your stop would be a market order, the stop's real fill could be worse than the stop price.

When it fails: common mistakes

  • Trusting the last price. On thin pairs the last trade can be minutes or hours old. The real buy price is the ask, and the real sell price is the bid.
  • Judging by the spread only. As GSB/USDT shows, a tight spread with almost nothing behind it is not liquidity.
  • Ignoring the exit. Getting in is the easy half. Selling into a thin bid in a falling market is where slippage hurts most, and a stop-loss that becomes a market order fills at whatever bids are left.
  • Assuming liquidity is constant. Today's liquidations show how quickly books thin out when many positions are closed at once.
  • Assuming backtests include it. Hunt4Coin's backtester and paper trading charge exchange fees but do not model slippage, spread or order-book depth (see the facts page), so on illiquid coins real results would be worse than the simulation.

Risk management

  • Stop placement: on thin pairs, put the stop where the idea is wrong on the chart, then add the spread and some slippage when you work out the loss. If the realistic loss is too large, trade smaller or skip the pair.
  • Position sizing: a simple rule of thumb many traders use is to keep an order well below the depth within 1% of the price on the side you will exit into; compute your size from risk per trade first, then check it against depth.
  • Invalidation: if the spread or depth changes sharply after you enter (a market-wide cascade, a delisting notice, an exchange outage), treat that as a reason to reassess, even if the chart level hasn't been hit.
  • Costs in R: express spread plus fees as a fraction of your planned risk. Paying 0.3% to enter and exit a trade with a 1% stop uses up 30% of the risk before the trade moves.

Practice drill (free, about 20 minutes)

  1. Open the free market list and sort by 24h volume. Note the volume of the 1st, 50th and 200th coin.
  2. Open each one's chart on the candle charts on the 1-hour timeframe, add Volume, and compare how continuous the candles look.
  3. On an exchange you use, open the order book of one top pair and one small pair. Write down the best bid, best ask and spread %, then add up the asks within 1% of the mid-price.
  4. Work out the cost of a $1,000 market buy in each, before fees, as we did in the table above.
  5. Check the fee on the exchange fees table and add it: what is the total round-trip cost (buy and sell) in each pair?
  6. In paper trading, plan a trade in the more liquid pair with a stop that risks 1% of the $1,000 practice balance; write the expected spread and fees next to it.
  7. Optional: open the crypto screener (top 100 coins) and note how many of the coins it shows also had more than $10 million of 24h volume today.

FAQ

What is a good bid-ask spread in crypto? On the largest pairs of a big exchange, spreads are often a few thousandths of a percent or less; in our 13 November snapshot BTC/USDT's was one cent on $68,545. On smaller coins, 0.1% to 1% is common. Look at depth as well, because a tight spread with little volume behind it can still be expensive to trade.

What is slippage? The difference between the price you expected and the average price you got. It happens when your order is larger than the best price's available size and fills at worse prices further up or down the book, or when the price moves between clicking and filling.

Why does liquidity matter if I only trade small amounts? Because the spread is paid on every trade, whatever the size, and because thin books can produce wicks that hit stops. In our snapshot even a $10,000 buy cost 0.29% to 0.68% on the two thinnest pairs, several times a typical exchange fee.

Lesson 4 summary

The chart shows the last price; liquidity decides the price you get. Read the spread and the depth, compare your order with what is waiting within 1% of the price, prefer the deepest pair for the coin you want, and count spread and slippage alongside fees, especially on days like 13 November when liquidations thin the books. Next, in Lesson 5, we cover order types: market, limit and stop orders, and how each one interacts with the order book. Full course: Hunt4Coin Trading Mastery Program.

Education only, not financial advice. Trading crypto, stocks, metals, oil or forex is risky; never trade money you can't afford to lose.

Sources

More guides

All learn